CATEGORY


Rode SC6-L - Ultra-compact 2x2 Lightning Audio Interface for iOS Devices

Brand: Rode

Model Number: SC6L

Product Code: QD1742

Availability: In stock

AED 318.20 AED 334.95

The Rode SC6-L is a simple input/output breakout box designed for Apple iOS devices. Inspired by the original SC6 with a 3.5mm TRRS jack, the SC6-L uses a Lightning Connector to connect directly to Apple iOS devices.

With two TRRS inputs and one stereo headphone output, the SC6-L can be used with two RØDE smartLav+ microphones and one pair of headphones, allowing audio monitoring and playback, perfect for interview scenarios. The SC6-L can also be used with RØDE’s range of VideoMics in conjunction with a TRRS adaptor, such as the SC4 and SC7.

Swiftly record two-person interviews, podcasts, and vlogs straight to your iPhone, iPad, or iPod with the RODE SC6-L ultra-compact 2x2 Lightning audio interface and a pair of TRRS-equipped microphones (mics available separately). Pocket-friendly and bus-powered, the SC6-L is perfect for keeping your setup small and simple while maintaining quality and enjoying app-based optimization.

At one end of the SC6-L, you'll find two 3.5mm TRRS jacks to accept signal from microphones such as the Rode smartLav+ lapel mic, Rode VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS outputs. Between the two TRRS jacks is a 3.5mm headphone output for monitoring the incoming signal to make sure it is clean and free of distortion.

At the other end of the interface, a short cable is terminated with a Lightning connector, which connects directly to your iOS mobile device to facilitate convenient and clear recording at digital resolutions up to 24-bit / 48 kHz, making it a broadcast-quality unit.

Use the SC6-L with the Rode Reporter app to change preamp gain, switch between summed stereo or dual-mono record modes, and turn direct monitoring on or off, all from your Apple mobile device (iOS 11 or later required). Alternatively, you can use the SC6-L with other audio/video apps such as the onboard Camera app, GarageBand, Voice Memos, and more.

Features

  • Interviewers, Podcaster, Vloggers
  • Ultra-compact 2x2 Lightning Interface
  • Strapped with the SC6-L and a couple TRRS microphones (available separately), you can easily capture two-person interviews, podcasts, and vlogs to your Lightning-equipped Apple mobile device in record time.
  • Separate 3.5mm TRRS mic inputs are provided on the SC6-L to accommodate two TRRS microphones such as the Rode smartLav+ lapel mic, Rode VideoMics (in conjunction with TRRS adapters), and third-party microphones with the appropriate TRRS outputs.
  • Connect earphones or headphones to the 3.5mm headphone port to monitor your input signal or the playback from a recording.
  • Since the SC6-L is bus powered through the Lightning connection to your iPhone, iPad, or iPod, no batteries are needed.
  • When using the SC6-L with the Rode Reporter app, you can adjust the mic preamp gain, choose between summed stereo and dual-mono recording, and enable/disable direct monitoring from your Apple mobile device.


Specifications

Form Factor

Mobile

Channels of I/O

Analog:
2 Inputs / 2 Outputs

Max Sample Rate/Resolution

48 kHz / 24-Bit

Number of Mic Preamps

2

Input Level Adjustment

1 x via Software

Analog Audio I/O

2 x 1/8" / 3.5 mm TRRS Unbalanced Mic Input
1 x 1/8" / 3.5 mm TRS Unbalanced Headphone Output

Host Connection / USB

1 x Lightning

Frequency Response

20 Hz to 20 kHz

Sample Rates

44.1 / 48 kHz

Bit Depths

24-Bit

Sync Sources

Internal

OS Compatibility

iOS 11 or Later

Mobile Device Compatibility

iPhone
iPad
iPod Touch

Required Hardware

Available Lightning Port

Power Requirements

Lightning Bus Power

Dimensions

12.02 x 4.0 x 1.1 cm

Weight

16.0 g

Package Weight

68 g

Package Dimensions

17.91 x 8.51 x 2.54 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product