CATEGORY


Audio Technica AT-LPW30TK - Fully Manual Belt-Drive Turntable

Brand: Audio Technica

Model Number: AT-LPW30TK

Product Code: QD1470

Availability: Subject to availability

AED 1,199.00

The Audio-Technica AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

The Audio-Technica AT-LPW30TK is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. The two-speed (33-1/3 and 45 RPM) turntable features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated teak veneer to limit low-frequency acoustical feedback.

The turntable includes a straight aluminum tonearm with adjustable tracking force and an AT-HS4 universal 1/2"-mount headshell with an AT-VM95C Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95C cartridge, which comes with a 0.6 mil conical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Features

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast Aluminium platter with rubber mat
  • AT-HS4 universal 1/2"-mount headshell and AT-VM95C Dual Moving Magnet phono cartridge with 0.6 mil conical stylus
  • AT-VM95C cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with teak simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Specifications

Turntable Type

Belt-Drive Manual Turntable

Motor

DC Servo

Drive Method

Belt Drive

Speed

33-1/3 rpm, 45 rpm

Turntable Platter

Die-Cast Aluminium

Signal to Noise Ratio (SNR)

> 60 dB

Output Level

Preamp Phono : 4 mV Nominal at 1 kHz, 5 cm/sec

Preamp Line : 200 mV Nominal at 1 kHz, 5 cm/sec

Preamp Overall Gain

35 dB Nominal, RIAA Equalized

Power Supply Requirements

Input : 100 to 240 VAC, 50/60 Hz

Adapter : 12 VAC, 0.5A

100 V 60 Hz

Power Consumption

Working : 1.1 W

Motor Off : 1.0 W

Power Off : 0.1 W

Tonearm Type

Static Balanced Straight Aluminium Pipe Tonearm

Effective Arm Length

8.8" / 22.3 cm

Overhang

0.7"/ 1.6 cm

Cartridge Weight

Applicable Cartridge Weight : 12 g to 17 g

Stylus Pressure Adjustment

0 to 3 g

Replacement Stylus

AT-VMN95C

Package Dimensions (W x D x H)                          

4.19 x 33.9 x 11.6 cm

Weight

3900 g

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product