CATEGORY


Audio Technica AT-LPW50PB - Fully Manual Belt-Drive Turntable

Brand: Audio Technica

Model Number: AT-LPW50PB

Product Code: QD1477

Availability: In stock

AED 1,799.00

The Audio-Technica AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The Audio-Technica AT-LPW50PB is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an anti-resonance 30 mm thick MDF (medium density fiberboard) plinth, with a high-gloss, piano-black finish, to dampen low-frequency acoustical feedback, and a sensor-monitored motor to ensure accurate platter rotation speeds of 33-1/3 and 45 RPM.

The turntable includes a straight, matte-finish, carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal 1/2"-mount headshell with a black AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application. The AT-LPW50PB is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Features

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Motor features a speed-sensor system to maintain accurate platter rotation speed
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast Aluminium platter with rubber mat
  • AT-HS4 universal 1/4"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge (black) with 0.3 x 0.7 mil elliptical stylus
  • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight, matte-finish, carbon-fiber tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance 30 mm thick MDF (medium density fiberboard) plinth with high-gloss, piano-black finish
  • High-isolation, height-adjustable feet
  • Built-in switchable phono preamplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
  • Includes dual RCA (male) to dual RCA (male) stereo cable, 45 RPM adapter, rubber mat, and removable hinged dust cover

Specifications

Motor
DC Servo
Drive Method
Belt Drive
Speeds
33 1/3, 45 rpm
Tonearm Type
Straight, Carbon Fiber, Static-Balanced
Effective Tonearm Length
8.8" / 223.6 mm
Overhang
0.73" / 18.6 mm
Tracking Error Angle
<2°
Cartridge Weight
Applicable: 12 to 17 g
Stylus Pressure Adjustment
0 to 3 g
Replacement Stylus
AT-VMN95E BK
Cartridge Type
VM
Recommended Load Impedance                    
47 Kilohms
Stylus
0.3 x 0.7 mil Bonded Elliptical
Stylus Cantilever
Aluminium Pipe
Signal to Noise Ratio
>60 dB
Tracking Force
1.8 to 2.2 g
Cartridge Weight
0.22 oz / 6.1 g
Overhang
Headshell Adjustment: ?5 mm
Wow and Flutter
33 rpm: <0.15% WRMS @ 3 kHz
Connectors
1 x Stereo RCA Pair with Ground Screw
Gain
Phono Preamp: 35 dB Nominal, RIAA Equalized
Output Level
Phono: 4 mV Nominal at 1 kHz, 5 cm/sec
Line: 200 mV Nominal at 1 kHz, 5 cm/sec
Turntable Platter
Die-Cast Aluminium
Power Requirements
100 to 240 VAC, 50/60 Hz, 0.5 A Max
Power Consumption
Operational: ?1.3 W @ 110 VAC, 60 Hz
Motor Off: 1 W @ 110 VAC, 60 Hz
Power Off: 0.1 W @ 110 VAC, 60 Hz
Dimensions (W x D x H)                                            42.0 x 35.6 x 11.4 cm
Weight5560 g

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product