CATEGORY


Audio Technica AT-LPW40WN - Fully Manual Belt-Drive Turntable

Brand: Audio Technica

Model Number: AT-LPW40WN

Product Code: QD1472

Availability: Subject to availability

AED 1,499.00

The Audio-Technica AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

The Audio-Technica AT-LPW40WN is a fully manual, belt-drive turntable designed to give you optimal high-fidelity audio reproduction from vinyl. It features an aesthetically pleasing anti-resonance MDF (medium density fiberboard) plinth with simulated walnut wood veneer to limit low-frequency acoustical feedback and a sensor-monitored motor to ensure accurate platter rotation speeds at 33-1/3 and 45 RPM.

The turntable includes a straight carbon-fiber tonearm with adjustable tracking force and an AT-HS4 universal 1/2"-mount headshell with an AT-VM95E Dual Moving Magnet phono cartridge. Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the versatile, high-performance AT-VM95E cartridge, which comes with a 0.3 x 0.7 mil elliptical stylus, but is also compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

The AT-LPW40WN is equipped with a built-in selectable phono preamp and a detachable dual RCA output cable to enable direct connection to components with or without a dedicated phono input.

Features

  • Fully manual, belt-drive operation with two speeds: 33-1/3 and 45 RPM
  • Motor features a speed-sensor system to maintain accurate platter rotation speed
  • Fully manual operation
  • Adjustable dynamic anti-skate control
  • Professional anti-resonance, die-cast Aluminium platter with rubber mat
  • AT-HS4 universal 1/2"-mount headshell and AT-VM95E Dual Moving Magnet phono cartridge with 0.3 x 0.7 mil elliptical stylus
  • AT-VM95E cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
  • Straight carbon-fiber tonearm with hydraulically damped lift control and lockable rest
  • Anti-resonance MDF (medium density fiberboard) plinth with walnut simulated wood veneer
  • Built-in switchable phono pre-amplifier for phono or line-level output
  • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

Specifications

Motor

DC Servo

Drive Method

Belt Drive

Speeds

33-1/3 rpm, 45 rpm

Tonearm Type

Straight

Effective Arm Length

Tonearm : 8.8" / 22.36 cm

Overhang

1.86 cm

Tracking Error Angle

< 2 Â°

Cartridge Weight

Applicable : 12 g to 17 g

Anti-Skating Range

0 to 3 g

Signal to Noise Ratio (SNR)

> 60 dB

Wow and Flutter

0.15% (WTD) @ 3 kHz (JIS)

Headsheel

1/2" Mount

Styles

Type : 0.3 x 0.7 Mil Elliptical

Replacement : AT-VMN95E

Connectors

1 x Stereo RCA Phono / Line Pair (Switchable Preamplifier)

Gain

Phono Preamp : 35 dB Nominal, RIAA Equalized

Output Level

Phono : 4 mV Nominal at 1 kHz, 5 cm/sec

Line : 200 mV Nominal at 1 kHz, 5 cm/sec

Turntable Platter

Die-Cast Aluminium

Construction Material

Plinth : MDF

Tonearm : Carbon-Fiber

Power Requirements

100 to 240 VAC, 60 Hz

Power Consumption

1 W

Dimensions (W x D x H)                                      

42.0 x 34.0 x 11.69 cm

Weight

4700 g

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product