CATEGORY


Rode SVMPR (Stereo VideoMic Pro Rycote) - Stereo VideoMic Pro with Rycote Lyre Suspension Mount

Brand: Rode

Model Number: SVMPR

Product Code: QD1734

Availability: In stock

AED 926.68 AED 975.45

The Rode Stereo VideoMic Pro Rycote (SVMPR) builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.

The Stereo VideoMic Pro Rycote (SVMPR) builds on the success of the Stereo VideoMic Pro with a few improved upgrades such as a Rycote Lyre shockmount, higher-sensitivity X/Y capsules, denser foam windscreen, better RF shielding, and a thicker Kevlar braided cable. The microphone retains all of the switch locations and other features as the previous model, for use as an on-camera DSLR and camcorder microphone for video applications.

The integrated Rycote Lyre shockmount system protects against handling noise. The Stereo VideoMic features a high-pass filter switch at 75 Hz for minimizing low-frequency noise, and a -10 dB pad for maximizing headroom on behalf of capturing loud signals without distortion. The +20 dB level-boost switch is specifically designed to provide a higher-quality signal with DSLR cameras. When activated, the camera preamp level is reduced, resulting in a lower noise floor and a much clearer recording.

Features

  • Broadcast-recording-quality on-camera microphone
  • Matched pair, 1/2" condenser capsules in X/Y stereo configuration
  • Ultra-lightweight, compact form factor
  • Two-step high-pass filter (flat, 75 Hz)
  • Three-position level control (-10, 0, +20 dB)
  • 9V-battery-powered - over 100 hours of use (alkaline)
  • Integrated Rycote Lyre shockmount
  • Denser foam windscreen
  • 1/8" (3.5mm) stereo mini-jack output
  • Billeted metal camera shoe mount with 3/8" thread for easy boom pole mounting


Specifications

Transducer

Pressure gradient

Polar Pattern

XY Cardioid

Frequency Range

40 Hz to 20 kHz (selectable HPF @ 75 Hz)

Sensitivity

-38 dB (12.6 mV @ 94 dB SPL) ±2 dB re 1 V/Pa @ 1 kHz

Output Impedance

200 Ohms

Maximum Output

+4.2 dBu (@ 1% THD into 1 kOhms)

Dynamic Range

100 dB

Maximum SPL

134 dB, max (1 kHz, 1% THD into 1 kOhms load)

Signal / Noise

76 dBA (A-weighted per IED651)

Power Supply

9 V alkaline battery

Connection

1/8" (3.5 mm) stereo mini-jack

Signal to Noise Ratio

76 dBA SPL (A-weighted per IEC651)

Dimensions (D x W x H)

11.5 x 8.0 x 13.4 cm

Weight

116 g (without battery)

Package Weight

259 g

Package Dimensions (LxWxH)

22.09 x 13.08 x 7.87 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product