PRODUCT DETAILS

Sennheiser XSW-D XLR BASE SET - XLR Base Set with XSW-D Female XLR Transmitter, XSW-D Male XLR Receiver and USB-A to USB-C Charging Cable

Brand: Sennheiser

Model Number: XSW-D XLR BASE SET

Product Code: QD1539

Availability: In stock

Total Reviews(0)
write reviews

AED 1,211.62 AED 1,262.10

The Sennheiser XSW-D XLR BASE SET is an easy entry point into the world of wireless microphone audio for singers, vocalists, and presenters looking for a stage-ready system that's both cost effective and simple to use. It puts world-renowned Sennheiser wireless sound quality in a miniaturized, plug-and-go, 1-button digital system that anyone can operate. Plug it in, power it up, and you're immediately up and running, streamlining your setup so you can concentrate on delivering your performance with confidence.

The XSW-D XLR BASE SET comes with a plug-on transmitter ready to be used with a handheld dynamic microphone of your choice. The XLR-equipped, plug-in receiver connects to a wide variety of professional audio gear, including mixing boards and portable PA systems, allowing you to capture crisp-sounding vocals on stage, or in rehearsals, houses of worship, and event spaces.

Features

The exceptionally lightweight and compact plug-on transmitter lets you connect any dynamic microphone equipped with an XLR connector. The transmitter is designed to only transmit signal from a mic (not from a mixer or recorder) and it does not provide phantom power.
Plug the compact receiver directly into the XLR input of your audio mixer or PA, and you're ready to turn the system on. The receiver cannot be phantom powered by a mixer. It needs to be charged ahead of time or used while being charged via USB.
The 1-button, 1-LED concept with single-button interface and status indicator effortlessly handles power and linking tasks for you.
The receiver and transmitter are pre-paired at the factory so when you turn on the system, it works without the need for any additional button pressing.
Sennheiser wireless mic systems are an industry standard, prized by professionals for their clarity and reliability. The XSW-D system allows first-time and budget-conscious users to get their hands on genuine Sennheiser sound quality without breaking the bank.
The functionality of this XSW-D XLR BASE SET can easily be expanded by adding XSW-D Series transmitters, as your needs evolve.
With this set, adding the XSW-D 3.5mm bodypack transmitter allows you to connect either a Sennheiser-compatible lavalier or headset mic of your choice for hands-free presentations.
Eco-friendly USB-rechargeable lithium-ion batteries, 1-hour charging to reach 50% of battery time
5-hour total battery life gives you plenty of performance time
Conveniently recharge batteries via USB while in operation or during breaks throughout the day
Up to five systems can be operated simultaneously in the same environment

Specifications

System

Frequency Range

2.400 to 2.483 GHz

Latency

<4 ms with aptX Live Codec

Transmission Range

250' / 76.2 m (Line of Sight)

Simultaneous Operation of Units

Up to 5 Systems Simultaneously

Frequency Response

80 Hz to 18 kHz

Signal-to-Noise Ratio

>/-106 dB

THD

<0.1 %

Modulation

GFSK with TDMA

Operating Temperature

-10 to 55° C / 14 to 131° F

Relative Humidity

95% (Non-Condensing)

Transmitter

Type

Plug-On Transmitter

Input Connector

XLR-Female

Phantom Power

RF Output Power

10 mW

Input Level

Mic-Level Input Only

Battery

Type: Built-In, USB-Rechargeable, Lithium-Ion
Battery Life: 5 Hours
Charging Time: 3 Hours (Typical)
Charging Cycles: Up to 1000 Cycles
Nominal Voltage: 3.7 V
Cell Capacity: 850 mAh
Input Voltage: 5.0 V (Typical)
Charging Temperature: 32 to 140° F / 0 to 60° C

Dimensions

10.2 x 2.4 x 2.8 cm

Receiver

Type

Plug-In

Output Connector

XLR-Male

Audio Output Level

Consumer Line-Level Only: -12 dBu (Maximum)

Battery

Dimensions

10.9 x 2.4 x 2.8 cm

Package Weight

340 g

Package Dimensions (L x W x H)

28.96 x 14.48 x 1.80 cm

0 (Overall)

Based on 0 Comments

write reviews

(0)

CATEGORY

Rating: