Description

Description

The Neumann U 67 is a universal studio microphone suitable for all applications. Its smooth top-end with a subtle tube shimmer makes the U 67 an outstanding vocal microphone. Due to its essentially linear response in three polar patterns. The U 67 is also a very versatile microphone for all kinds of instruments such as strings, woodwinds, brass, piano, drums, acoustic and electric guitar, bass guitar and upright bass.

The U 67 was the first microphone equipped with the famous K 67 capsule, which has since become associated with the Neumann sound and continues to be used in its successor, the U 87 A. No less important is the U 67's masterful tube circuit featuring a clever pre-emphasis/de-emphasis scheme to minimize tube hiss. The U 67 was also the first microphone to address modern recording techniques such as close miking. Its switchable low cut filter compensates for the proximity effect occurring at short recording distances. Using its preattenuation, the U 67 can handle high sound pressure levels of up to 124 dB without distortion (and much more if you don't mind a bit of tube grit).

As timeless as its sound and technical design is its outer appearance. The U 67's cone-shaped body and the tapered headgrille have since become iconic for the Neumann brand; the same elegant design would grace its solid state successor, the U 87, for the next 50+ years.

Description

Description

The Sennheiser e604 Microphone is a rugged, cardioid instrument microphone that is specially designed to handle the high sound pressure levels of drums, percussion, woodwind, and brass instruments without distortion. It captures frequencies between 40 Hz and 18 kHz, doing so at sound pressure levels in excess of 160 dB without nasty distortion.

Based on the design of the well-regarded MD 421 microphone, the e 604 features a dynamic transducer, which does not require phantom power, and its cardioid polar pattern is effective in minimizing pickup and feedback at the off-axis sections of the capsule. An integral stand mount screws directly onto mic stands, but the included clip of the microphone attaches the microphone to the rim of a drum or the bell of saxophones. A slight bump between 4 and 5 kHz allows instruments to cut through the mix. 

Here, three e604 microphones are bundled together for your convenience. With these three mics, you could capture the snare, rack tom, and floor tom of a drum set. Another usage could be three different horns within a horn section. The decision is yours with three microphones at your disposal, there are quite a few options indeed.

Description

The Audio-Technica ATR1300X Unidirectional Dynamic Vocal/Instrument Microphone is a handheld mic that is tuned for clear vocal and instrument reproduction. It can be used for live stage and rehearsal applications and is designed to reduce the pickup of sounds from the sides and rear of the microphone improving isolation and reducing feedback.

The mic's directional polar pattern keeps the pickup focused on the sound source, helping to prevent feedback. It features rugged metal construction, an on/off switch, and a detachable 5 m (16.5') cable (XLR to 1/4" plug) designed to work with live/studio mixers and sound systems. A great choice for competitive karaoke singers and other aspiring vocalists, the ATR1300x comes with an adjustable microphone stand clamp.

Description

Description

Description

The Rode NT5 is a small diaphragm microphone featuring full frequency response and low-noise output circuitry. Designed for general instrument recording and sound reinforcement.

Description

The Shure VP83F is an ultra-compact, rugged microphone for high-definition audio capture with DSLR cameras and HD camcorders. Developed with a highly directional super-cardioid/lobar polar pattern, the VP83 provides superior off-axis rejection and delivers natural audio reproduction. An integrated, custom designed Lyre shock mount (exclusively developed with Rycote) provides robust isolation from vibration and mechanical noise.

With its integrated WAV audio recorder and separate audio output, the VP83F allows convenient redundant recording to a microSDHC card (available separately) and your camera while supporting real-time headphone monitoring.

Featuring rugged metal construction while remaining compact and lightweight, the VP83F is designed to be a reliable partner for your portable video rig. Its integrated shockmount attaches directly to your camera or tripod and impedes camera handling noise and vibrations transferred through a tripod. To reduce noise from light winds, the VP83F is equipped with a foam windscreen. A detachable coiled 3.5mm TRS cable is supplied for easy connection from the mic to your camera.

Description

Description

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam,