CATEGORY


PreSonus Eris E3.5 BT (Pair) - Active Media Reference Monitors with Bluetooth

Brand: PreSonus

Model Number: ERIS E3.5 BT

Product Code: QD2970

Availability: In stock

AED 599.00

The PreSonus Eris E3.5 BT is a pair of Bluetooth enabled 3.5" 2-way 25W nearfield monitors designed to provide a compact sonic reference system for musicians, producers, and audio engineers in home setups, project studios, and commercial facilities. Each monitor produces a frequency response of 80 Hz to 20 kHz via a 3.5" Kevlar woofer and a 1" silk dome tweeter powered by a 25W class AB amplifier. The monitors can handle 100 dB maximum peak SPL. A rear bass-reflex port provides enhanced low-frequency range.

The PreSonus Eris E3.5 BT is a pair of Bluetooth enabled 3.5" 2-way 25W nearfield monitors designed to provide a compact sonic reference system for musicians, producers, and audio engineers in home setups, project studios, and commercial facilities. Each monitor produces a frequency response of 80 Hz to 20 kHz via a 3.5" Kevlar woofer and a 1" silk dome tweeter powered by a 25W class AB amplifier. The monitors can handle 100 dB maximum peak SPL. A rear bass-reflex port provides enhanced low-frequency range.

For inputs, the monitor system accepts balanced 1/4" TRS, unbalanced 3.5mm, and unbalanced RCA inputs. An integrated 2-band EQ allows you to fine tune the monitors to your listening preference. The EQ controls include ?6 dB gain at 100 Hz and ?6 dB at 10 kHz. A front-panel 3.5mm stereo mini-jack is provided for easy headphone monitoring.

Each cabinet uses resonance-suppressing internal bracing to optimize the sound output and the amplifiers include RF interference, output-current limiting, over-temperature, transient, and subsonic protection circuits.

Features

  • Wireless Bluetooth 5.0 connectivity
  • 3.5" Kevlar low-frequency transducer
  • 1" ultra-low-mass, silk-dome, high-frequency transducer
  • Rear-firing acoustic port for enhanced bass-frequency reproduction
  • Optimized, resonance-suppressing internal bracing
  • High-frequency shelving EQ at 10 kHz
  • Low-frequency shelving EQ at 100 Hz
  • Front-panel volume control for speakers and headphone amplifier
  • Balanced 1/4" TRS, unbalanced 3.5mm stereo, and unbalanced RCA inputs
  • Integrated stereo headphone amplifier with front-panel 3.5mm output
  • RF interference, output current limiting, over-temperature, transient, and subsonic protection
  • Amplifier 'soft start' feature eliminates popping on power-up
  • Internal power supply with IEC connector.


Specifications

LF Driver

3.5" / 89 mm Kevlar speaker

HF Driver

1" / 25 mm silk dome tweeter

Inputs

2 x balanced 1/4" TRS
2 x unbalanced RCA (L/R pair)
1 x 1/8" (3.5 mm) TRS stereo mini-jack

Outputs

1 x 1/8" (3.5 mm) TRS stereo mini-jack

Frequency Response

80 Hz to 20 kHz

Crossover Frequency

2.8 kHz

Amplifier Power

25 W per speaker

Maximum SPL

At 1 m: 100 dB (peak)

Input Impedance

10 kOhms

Volume Management

A-type taper

Mid Frequency Driver

Control: variable (-6 to +6 dB, center @ 100 Hz)

High Frequency Driver

Control: variable (-6 to +6 dB, center @ 10 kHz)

Protection

RF interference
Output-current limiting
Over-temperature
Turn on/off transient
Subsonic filter
External mains fuse

Power Requirements

100 to 120 VAC at 50/60 Hz, or 220 to 240 VAC at 50/60 Hz

Cabinet

Vinyl-laminated MDF

Dimensions (W x D x H)                                    

14.1 x 16.2 x 21.0 cm

Weight

2900 g (each pair)

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product