CATEGORY


Neumann V 402 Rackmount 2-Channel Microphone Preamplifier

Brand: Neumann

Model Number: V 402

Product Code: QD1660

Availability: In stock

AED 10,862.78 AED 11,434.50

The Neumann V 402 is a rackmount 2-channel microphone, instrument, or line preamplifier, painstakingly designed to deliver the true sound of your source at any gain setting. Its tranformer-less circuitry ensures detailed sound without coloration, and its onboard studio-grade headphone amp enables convenient monitoring of your live inputs.

The Neumann V 402 is a rackmount 2-channel microphone, instrument, or line preamplifier, painstakingly designed to deliver the true sound of your source at any gain setting. Its tranformer-less circuitry ensures detailed sound without coloration, and its onboard studio-grade headphone amp enables convenient monitoring of your live inputs.

With up to 60 dB of gain, switchable -20 dB pads, and 60 Hz high-pass filters, you can easily dial in and optimize your signal while avoiding distortion and degradation. Front-panel DI inputs make the V 402 equally ideal for Hi-Z instruments such as electric guitar and bass, as well as dynamic and condenser microphones.

Each channel also provides selectable 48V phantom power, switchable polarity, and a multi-segment meter. Separate volume controls allow you to adjust the balance for the monitoring mix, which feeds the front-panel 1/4" headphone output.

Features

  • Onboard Studio-Grade Headphone Amp
  • Front-Panel DI Hi-Z Instrument Inputs
  • Up to 60 dB of Gain
  • Switchable Phantom Power and Polarity
  • Adjustable Monitoring Mix
  • Multi-Segment Metering
  • Ultraclean transformerless design with up to 60 dB of gain
  • Switchable -20 dB pad for handling high-level sources up to 28 dBu without distortion
  • 60 Hz low-cut filter removes pops and rumble without signal degradation
  • Balanced XLR inputs and outputs
  • Two studio-quality 1/4" instrument inputs with very high impedance
  • Clean studio-grade headphone amplifier (mono/stereo switchable)
  • Per-channel volume control for easy monitoring mix
  • Rear-panel ground-lift switch
  • Occupies 2 RU of rack space
  • Handmade in Germany

Specifications

Number of Channels

2

Inputs

2 x XLR 3-Pin Female Balanced Mic Inputs
2 x 1/4" TS Female Unbalanced Hi-Z Inputs

Outputs

2 x XLR 3-Pin Male Balanced Line Outputs
1 x 1/4" TRS Female Unbalanced Headphone Output (Mono/Stereo Switchable)

Pad

-20 dB

Low-Cut Filter

12 dB/Octave at 60 Hz

Phantom Power

48 VDC, >/- 10 mA (Selectable per Channel)

Frequency Range

<10 Hz to >100 kHz (-3 dB at 40 dB Gain)

Gain Range

Mic Input: +20 to +60 dB (Pad Off)
Hi-Z Input: 0 to +40 dB (Pad Off)

Maximum Input Level

Mic Input (Pad Off): +8 dBu
Mic Input (Pad On): +28 dBu
Hi-Z Input: +21 dBu

Maximum Output Level

Main Output: +26 dBu into 1-Kilohm Load Impedance
Headphone Output: +20 dBu into 150-Ohm Load Impedance

Input Impedance

Mic Input: Approximately 3 Kilohms
Hi-Z Input: 3.3 Megohms

Output Impedance

Main Output: Approximately 200 Ohms
Headphone Output: Approximately 2 Ohms

Metering

-24 to +24 dBu in 6 dB steps
Peak Indication at +24 dBu (Hold Time Approximately 3 Seconds)

Ground Lift

Switchable

Power Requirements

100 to 120 VAC and 220 to 240 VAC, 50/60 Hz

Power Consumption

25 W Maximum

Operating Temperature

32 to 122°F / 0 to 50°C

Storage Temperature

-13 to 158°F / -25 to 70°C

Operating Humidity

<75% Relative Humidity at 10°F / 40°C (Noncondensing)

Storage Humidity

<95% Relative Humidity (Noncondensing)

Altitude (Operating)

Up to 6562 ft / 2 km

Dimensions (W x H x D)                                          

48.3 x 8.9 x 24.2 cm

Weight

6200 g

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product