Description

Description

Whether you’re a keyboardist, drummer, or any other musician whose performance keeps them anchored in one spot, the PM1 was designed specifically for you. A convenient hardwired personal in-ear control center, the PM1’s belt pack puts monitor control right at your fingertips, plus it’s lightweight, ultra-easy to use and it doesn’t require a power source.

The PM1 features an extremely high-quality volume control for dialing in the perfect level every time. Designed for long life and super-smooth performance, this detented control stays where you put it.

Because your monitor is crucial to your performance, PM1’s XLR input connector accepts standard mic cables and features a locking mechanism to prevent accidental disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that PM1's XLR input is not designed to accept balanced line signals taken directly from your mixer, as an amplified source is required. For connecting a stereo source, such as your headphone amplifier or mixer's headphone output, you should use a TRS-to-XLR (male to male) cable.

You can use your favorite headphones, earbuds or custom-molded professional In-Ear Monitors (IEMs) with the PM1, thanks to the top-mounted, standard 3.5 mm (1?8") stereo output jack.

Description

The Shure P3TUK-K3E is a half-rack 24-bit digital audio wireless transmitter for the personal in ear monitoring system. It can be used in various environments to send 2 channels of audio to a bodypack receiver (sold separately), up to 300' away for applications such as live stage, theater, rehearsals, and more. It features audio reference companding to ensure transparent sound quality with no artifacts or dropouts.

This rugged transmitter is built with easy front-panel controls, including the one-touch sync and input level knobs which are there to enable quick setup and easy operation. Furthermore, the rear-panel has balanced inputs and loop outputs that can provide versatile connectivity to other audio sources or other P3T units.

Description

Description

Turn your dynamic microphone into wireless with the U3 2.4 GHz Digital Wireless Microphone System from Xvive Audio. It features a 2.4 GHz wireless band, 20 Hz to 20 kHz frequency response, and less than 5 ms latency. The system works up to a 90' range, and includes two rechargeable batteries with a five-hour life for both receiver and transmitter units. The transmitter plugs into a dynamic microphone or into DI or XLR output gear, and the receiver plugs into a live sound mixer, portable PA system, or a recorder. This system broadcasts on six channels simultaneously, and is suitable for live vocals, presentations, video productions, and houses of worship.

Description

Whether you're a keyboardist, drummer, or other musician whose performance keeps them anchored in one spot, the P2 Ultra-Compact Personal In-Ear Monitor Amplifier was designed specifically for you. A convenient hard-wired personal in-ear control center, the P2's belt pack puts monitor control right at your fingertips, plus it's powerful, lightweight and ultra-easy to use.

You can use your favorite headphones, earbuds or custom-molded professional In-Ear Monitors (IEMs) with the P2, thanks to the top-mounted, standard 3.5 mm (1/8") stereo output jack.

Because your monitor is crucial to your performance, P2's XLR / TRS combo input connector features a locking mechanism to prevent accidental mic cable disconnects. Just press the tab next to the bottom-mounted connector to release the cable at the end of the gig. It is important to note that P2's XLR input accepts balanced line signals taken directly from your mixer, allowing you to control the volume of the onboard amplifier.

P2's internal Mono/Stereo switch lets you choose the mode that best fits your needs. When using your mixer’s aux send or any other mono source, move the switch to the Mono position. For connecting to a headphone output or other stereo source, simply set the switch to Stereo and use an XLR-to-TRS or TRS-to-TRS (male to male) cable.

The P2 features an extremely high-quality level control with on/off switch for dialing in the perfect level every time. Designed for long life and super-smooth performance, this detented control stays where you put it.

When you do need to move around, say to change your amp or stomp settings, P2's built-in belt clip will always keep it close at hand. Just slip the P2 onto your waistband or belt and let the good times roll.

Description

Description

Description

The Shure PSM 300 Twin-Pack Wireless In-Ear Monitor Kit includes a Shure P3T wireless transmitter, two P3R-J13 wireless bodypack receivers, and two Shure SE112 (gray) sound-isolating earphones. Other accessories include a 1/4 wave antenna, a BNC bulkhead adapter and cable, a power supply, four AA batteries, six pairs of flex sleeves (S, M, L), two drawstring pouches, and two zipper bags for the receivers. This kit can be used to deliver 24-bit digital audio, and it provides performers with a wireless monitoring option in applications for live concerts, theater, rehearsals, houses of worship, and more.

The P3T from Shure is a half-rack 24-bit digital audio wireless transmitter for the personal in ear monitoring system. It can be used in various environments to send 2 channels of audio to a bodypack receiver (sold separately), up to 300' away for applications such as live stage, theater, rehearsals, and more. It features audio reference companding to ensure transparent sound quality with no artifacts or dropouts. This rugged transmitter is built with easy front-panel controls, including the one-touch sync and input level knobs which are there to enable quick setup and easy operation. Furthermore, the rear-panel has balanced inputs and loop outputs that can provide versatile connectivity to other audio sources or other P3T units.

The P3R-J13 Wireless Bodypack Receiver from Shure is a slim and compact wireless receiver designed to be used with a Shure P3T transmitter, (sold separately), to comprise a PSR 300 personal monitoring system. It can be used in various environments for audio applications such as, live stage, theater, houses of worship, and more. It features 24-bit digital audio clarity and has a range of up to 300'. Find a wireless channel using the one-touch scan function to automatically select the cleanest frequency available. Adjust the volume and use the MixMode feature or stereo mode to create a personal mix from two channels of audio. Two standard AA batteries provide up to 6 hours of continuous use. The power save mode preserves battery life when an earphone is not connected. Two AA batteries and a zipper bag are included.

The SE112 Sound Isolating Earphones from Shure have an in-ear design that can provide up to 37dB of isolation. Based on technology from Shure's personal monitor systems, the earphones have a lightweight body with an over-the-ear configuration and angled nozzle for a comfortable fit. Three pairs of sound isolating sleeves are included, in addition to a drawstring carrying pouch.

Description

Description

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam,