CATEGORY


Sennheiser e604 - Dynamic Microphone for Percussion

Brand: Sennheiser

Model Number: e604

Product Code: QD1526

Availability: In stock

AED 561.59 AED 591.15

The Sennheiser e604 Microphone is a rugged, cardioid instrument microphone that is specially designed to handle the high sound pressure levels of drums, percussion, woodwind, and brass instruments without distortion. It captures frequencies between 40 Hz and 18 kHz, doing so at sound pressure levels in excess of 160 dB without nasty distortion.

The Sennheiser e604 Microphone is a rugged, cardioid instrument microphone that is specially designed to handle the high sound pressure levels of drums, percussion, woodwind, and brass instruments without distortion. It captures frequencies between 40 Hz and 18 kHz, doing so at sound pressure levels in excess of 160 dB without nasty distortion.

Based on the design of the well-regarded MD 421 microphone, the e 604 features a dynamic transducer, which does not require phantom power, and its cardioid polar pattern is effective in minimizing pickup and feedback at the off-axis sections of the capsule. An integral stand mount screws directly onto mic stands, but the included clip of the microphone attaches the microphone to the rim of a drum or the bell of saxophones. A slight bump between 4 and 5 kHz allows instruments to cut through the mix. 

Here, three e604 microphones are bundled together for your convenience. With these three mics, you could capture the snare, rack tom, and floor tom of a drum set. Another usage could be three different horns within a horn section. The decision is yours with three microphones at your disposal, there are quite a few options indeed.

Features

  • Dynamic Element Microphone
  • Based on MD 421 Design
  • For Drums & Woodwind Instruments
  • Cardioid Polar Pattern
  • 40 Hz to 18 kHz Frequency Response
  • Fast Transient Response
  • Reinforced-Fiberglass Body
  • Integrated Clip Mount
  • 3 Microphones in 1 Package
  • Handles sound pressure levels of 160 dB and above without distortion
  • Impact-resistant fiberglass-reinforced housing
  • Simple handling and flexible positioning
  • Low sensitivity to handling noise
  • Humbucking coil


Specifications

Capsule

Dynamic

Polar Pattern

Cardioid

Frequency Range

40 Hz to 18 kHz

Maximum SPL

160 dB SPL

Impedance

350 Ohms

Sensitivity

1.8 mV/Pa at 1 kHz

Output Connectors (Analog)                             

1 x XLR 3-Pin

Dimensions

3.3 x 5.9 cm

Weight

60 g

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product