A PHP Error was encountered

Severity: Warning

Message: fopen(/var/cpanel/php/sessions/ea-php82/ci_session4b3b6a89f7abfea632f9bb82fec0f8183921f926): Failed to open stream: Disk quota exceeded

Filename: drivers/Session_files_driver.php

Line Number: 178

Backtrace:

File: /home/quickdealz/public_html/application/controllers/Index.php
Line: 8
Function: __construct

File: /home/quickdealz/public_html/index.php
Line: 315
Function: require_once

A PHP Error was encountered

Severity: Warning

Message: session_start(): Failed to read session data: user (path: /var/cpanel/php/sessions/ea-php82)

Filename: Session/Session.php

Line Number: 143

Backtrace:

File: /home/quickdealz/public_html/application/controllers/Index.php
Line: 8
Function: __construct

File: /home/quickdealz/public_html/index.php
Line: 315
Function: require_once

PRODUCT DETAILS

CATEGORY


Rode VMPR (VideoMic Pro) - Camera-Mount Shotgun Microphone

Brand: Rode

Model Number: VMPR

Product Code: QD1739

Availability: In stock

AED 926.68 AED 975.45

The Rode VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio. The Rode VideoMic Pro camera-mount shotgun microphone is ideal for mobile journalists, vloggers, budget filmmakers, and run-and-gun shooters looking for a cost-effective way to step up to the next level in quality.

The Rode VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.

At the heart of the VideoMic Pro is an all-new 1/2" condenser capsule that provides broadcast-quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels) with an incredibly low self-noise of just 14db. A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

The integrated Rycote Lyre based shock mounting system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Constructed from a single piece of hard-wearing thermoplastic, the Lyre® provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap.

Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras, allowing the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.

The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting. The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

The Rode VideoMic is designed and made in Australia, and covered by Rode Microphones' industry leading 10 year warranty.

Features

  • Whereas most built-in camera microphones pick up sound from all directions, this microphone utilizes a supercardioid polar pattern to focus on sound in front of it while attenuating sound from the sides and rear. Its low-noise electronics and sensitive condenser element deliver more detailed audio than the mics typically found in cameras and portable recorders.
  • A straight 3.5mm cable is permanently attached to the mic for fast hookup to your camera. The cable's 3.5mm TRS plug is wired in a dual-mono configuration, ensuring that the mic signal is sent identically to both input channels of your camera or portable recorder.
  • Pop a 9V battery in the VideoMic Pro for up to 70 hours of operating time. The dedicated power LED changes from green to red when the battery should be replaced. The VideoMic Pro can still function for approximately 10 hours once the power indicator turns red, but performance will be compromised. Use the power switch to conserve battery life during periods of inactivity.
  • The high-pass filter can be set to flat or 80 Hz to roll off low-frequency noise from common sources such as air conditioners and traffic.
  • To enable optimal recording levels, the VideoMic Pro boasts a 3-stage gain control. Like the low roll-off and high-frequency boost, the gain control is digitally switched for precision and convenience. The +20 dB setting is ideal when recording to cameras, as it boosts the signal without requiring extreme gain on the camera's inferior preamp. Select the flat setting when routing the mic into a dedicated high-quality preamp, or switch to the -10 dB option when loud sound sources threaten to distort your recording.
  • Understanding that the rubber bands used in many shockmounts can snap and stretch, Rode chose to integrate a rugged Rycote Lyre suspension-style shockmount. This simplifies setup of the mic and inhibits the transfer of vibrations from the camera. Plus, the bottom of the shockmount features a camera shoe mount with a 3/8" thread, ensuring easy attachment to your camera or a boompole such as Rode's Micro Boompole (available separately).
  • The VideoMic Pro has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of wind noise in outdoor environments, consider a furry windshield such as the Rode DeadCat VMPR (available separately).
  • Expand the microphone's device compatibility with Rode accessories such as the SC4 and VXLR (both available separately). The SC4 is a short cable that lets you connect the VideoMic Pro directly to a smartphone or tablet equipped with a 3.5mm TRRS jack. The VXLR adapter is the ideal solution when you want to record the VideoMic Pro to a camcorder or mixer that has XLR inputs.


Specifications

Form Factor

Stand/Boom Mount

Sound Field

Mono

Operating Principle

Line Gradient

Capsule

Electret Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State (JFET)

High-Pass Filter

80 Hz

Gain Adjustment

-10 dB to +20 dB

Indicators

1 x Single LED (Power)

On-Board Controls

Gain, High-Pass Filter, On/Off

Windscreen

Foam (Included)

Frequency Range

40 Hz to 20 kHz

Maximum SPL

134 dB SPL

Off-Axis Rejection

2 dB at 60°
18 dB at 120°
10 dB at 180°

Impedance

200 Ohms

Sensitivity

-32 dBV/Pa at 1 kHz

Output Level

6.9 dBu (Max)

Dynamic Range

120 dB

Signal-to-Noise Ratio

80 dB

Equivalent Noise Level

14 dB A-Weighted

Output Connectors (Analog)

1 x 1/8" / 3.5 mm TRS

Number of Conductors

2

Operating Voltage

9 V (Battery Power)

Operating Current Consumption

7.8 mA

Battery Type

1 x 9 V

Approximate Battery Life

70 Hours

Color

Black

Mounting

3/8"-16 Female, Camera/Shoe-Mount, Shockmount (via Integrated Hardware)

Dimensions

Dia. 10.0 x L 16.99 cm

Weight

85 g

Package Weight

249 g

Package Dimensions (LxWxH)

21.84 x 13.08 x 7.87 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product