CATEGORY


Rode NTG3B Precision Broadcast-grade Super Cardioid Shotgun Microphone

Brand: Rode

Model Number: NTG3B

Product Code: QD1720

Availability: In stock

AED 2,732.15 AED 2,875.95

Capture broadcast-quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the black Rode NTG3B moisture-resistant shotgun microphone. Professional-level features such as low-noise circuitry, upgraded immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in post-production.

Capture broadcast-quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the black Rode NTG3B moisture-resistant shotgun microphone. Professional-level features such as low-noise circuitry, upgraded immunity to radio-frequency interference, and minimal handling noise reduce the need to repair and restore audio in post-production.

The NTG3B's high sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG3B delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. The solid brass housing is both durable and lightweight, and its anti-glare finish prevents reflections in the shot.

Features

  • For Indie Films, TV & Documentaries
  • Moisture-Resistant for Humid Conditions
  • Phantom Powered
  • Simple Operation with No Controls
  • Low-Noise Circuitry
  • High Sensitivity Requires Less Gain
  • Slight Presence Boost & Bass Attenuation
  • Windscreen Reduces Wind Noise
  • Lightweight Housing
  • When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The NTG3B's RF bias technology makes it almost completely resistant to moisture, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions. It also includes a weatherproof aluminum storage cylinder for maximum protection during travel.
  • The NTG3B was engineered for broadcast-quality sound, enhanced immunity to RF (radio frequency) interference, and low handling noise. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
  • The combination of the NTG3B's 10" long body and supercardioid polar pattern yields focused on-axis directionality with maximum rejection behind the mic. Its low self-noise of 13 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.
  • Thanks to its 3-pin XLR output and compliance with 44 to 52 VDC phantom power, the NTG3B is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.
  • The NTG3B includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG3B in the Rode SMR-4 shockmount (available separately) to impede the transfer of vibrations between your boompole and the mic.
  • The NTG3B has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).


Specifications

Form Factor

Stand/Boom Mount

Sound Field

Mono

Operating Principle

Line Gradient

Capsule

Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State

Windscreen

Foam (Included)

Frequency Range

40 Hz to 20 kHz

Maximum SPL

130 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)

Off-Axis Rejection

8 dB at 60°
18 dB at 120°
17 dB at 180°

Impedance

25 Ohms

Sensitivity

-30 dBV/Pa at 1 kHz

Output Level

8.2 mV (Max)

Dynamic Range

117 dB

Signal-to-Noise Ratio

81 dB A-Weighted

Equivalent Noise Level

13 dB A-Weighted

Output Connectors (Analog)

1 x XLR 3-Pin

Operating Voltage

48 V ± 4 V

Operating Current Consumption

5 mA

Color

Black

Mounting

3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)

Construction Material

Brass

Dimensions

Dia. 1.9 x L 25.5 cm

Weight

163 g (Microphone)

Package Weight

934 g

Package Dimensions (LxWxH)

33.27 x 17.02 x 8.01 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product