CATEGORY


Rode NTG2 Directional Super Cardioid Condenser Shotgun Microphone with Switchable HPF

Brand: Rode

Model Number: NTG2

Product Code: QD1718

Availability: In stock

AED 1,036.40 AED 1,090.95

Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG2 shotgun microphone. With low handling noise, the ability to endure loud sound sources before distortion, and support for battery or phantom power, the NTG2 offers a versatile, cost-effective solution for recording clean dialogue and sound effects.

Capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG2 shotgun microphone. With low handling noise, the ability to endure loud sound sources before distortion, and support for battery or phantom power, the NTG2 offers a versatile, cost-effective solution for recording clean dialogue and sound effects.

The NTG2's elevated sensitivity allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG2 delivers consistently clear sound due in part to its gentle rise in high frequencies and its rumble-reducing selectable low-cut filter. The durable and lightweight high-grade aluminum housing is finished in hard-wearing epoxy paint to withstand the stress of location recording.

Features

  • The combination of the NTG2's 11" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 18 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
  • Thanks to its 3-pin XLR output and operability with 48V phantom power or a single AA battery, the NTG2 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on cameras and camcorders.
  • The NTG2 includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG2 in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.
  • The NTG2 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).


Specifications

Form Factor

Stand/Boom Mount

Sound Field

Mono

Operating Principle

Line Gradient

Capsule

Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State (JFET)

High-Pass Filter

80 Hz, 12 dB/Octave

On-Board Controls

High-Pass Filter

Windscreen

Foam (Included)

Frequency Range

20 Hz to 20 kHz

Maximum SPL

131 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)

Off-Axis Rejection

14 dB at 60°
16 dB at 120°
12 dB at 180°

Impedance

250 Ohms (Phantom Power)
350 Ohms (Battery Power)

Sensitivity

-36 dBV/Pa at 1 kHz

Output Level

6.9 mV (Max)

Dynamic Range

113 dB

Signal-to-Noise Ratio

76 dB A-Weighted (1 kHz)

Equivalent Noise Level

18 dB A-Weighted

Output Connectors (Analog)

1 x XLR 3-Pin

Operating Voltage

48 V (Phantom Power)
1.5 V (Battery Power)

Operating Current Consumption

2 mA (Phantom Power)
0.18 mA (Battery Power)

Battery Type

1 x AA

Color

Black

Mounting

3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)

Construction Material

Aluminium

Dimensions

Dia. 2.2 x L 28.0 cm

Weight

161 g (Microphone)

Package Weight

519 g

Package Dimensions (LxWxH)

33.15 x 15.49 x 5.84 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product