CATEGORY


PreSonus Eris E5 - 2-Way Active Studio Monitors

Brand: PreSonus

Model Number: Eris E5

Product Code: QD1392

Availability: In stock

AED 599.00

The Eris E5 Two-Way Active 5.25" Studio Monitor from PreSonus delivers an accurate response with tight bass and a clear upper end. The Kevlar low frequency transducers, low-mass silk-dome tweeters and responsive Class AB amplification combine with acoustic-adjustment controls to create a versatile and adaptable listening system.

The Eris E5 Two-Way Active 5.25" Studio Monitor from PreSonus delivers an accurate response with tight bass and a clear upper end. The Kevlar low frequency transducers, low-mass silk-dome tweeters and responsive Class AB amplification combine with acoustic-adjustment controls to create a versatile and adaptable listening system.

The E5 begins with a front-ported enclosure made of vinyl-laminated MDF. It features a 5.25" Kevlar low-frequency driver mated with a 45W, Class AB amplifier. For the highs, Eris employs a 1" silk-dome tweeter powered by a 35W, Class AB amplifier. The E5 outputs a clean 102 dB peak SPL. Its frequency response is rated at 64Hz to 22kHz.

The Eris E5 provides a balanced XLR, a balanced 1/4" TRS, and an unbalanced RCA line-level input. Once you're plugged in, set the Input Gain and you're ready to go!

Features

  • The Eris E5 provides three EQ controls in its Acoustic Tuning section: High, Mid, and Low Cutoff. These controls enable you to fine-tune the monitors to your space. The Low control also is useful when using the E5 with a subwoofer.
  • A three-position Acoustic Space switch controls a second-order, low shelving filter that cuts frequencies below 800 Hz by either 2 or 4dB to compensate for the boundary bass boost that occurs in close proximity to walls or corners.
  • RF shielding protects against radio frequencies that could be introduced to the signal and become audible. Eris monitors also provide overheat protection, current-output limiting and subsonic protection. "Soft startup" amplifiers prevent damaging pops from sounding through the speakers when you power them up.
  • 5.25" Kevlar Woofer and 1" Tweeter
  • 70W Class AB Bi-amplification
  • 102dB Max SPL
  • Resonance-Suppressing Internal Bracing


Specifications

Inputs

1 x XLR balanced
1 x 1/4" TRS balanced
1 x RCA phono unbalanced

Frequency Response

53 Hz to 22 kHz

Crossover Frequency

3 kHz

LF Amplifier

45W

HF Amplifier

35W

Maximum SPL

102 dB @ 1 meter

Low Frequency Driver

5.25" (13.34 cm) Kevlar

High Frequency Driver

1" (2.54 cm) silk dome

Input Impedance

10k Ohms

Volume Control

A-type taper

Equalization

HF Control: -6, 0, +6 dB; continuously variable
MF Control: -6, 0, +6 dB; continuously variable
Low Cut Filter: Flat, 80 Hz, 100 Hz; switchable
Acoustic Space Control: Flat, -2 dB, -4 dB; switchable

Protection

RF interference
Output-current limiting
Over-temperature
Turn-on/off transient
Subsonic filter
External mains fuse

Enclosure Material

Vinyl-laminated MDF

Power Requirements

100 to 120V or 220 to 240V, 50/60 Hz

Dimensions (W x D x H)                                      

17.8 x 19.5 x 26.0 cm

Weight

4630 g

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product