CATEGORY


Electro-Harmonix Slammi Plus Polyphonic Pitch Shifter Guitar Pedal, 9.6DC-200 PSU (Optional)

Brand: Electro-Harmonix

Model Number: SLAMMI PLUS

Product Code: QD3026

Availability: In stock

AED 833.65

The Electro-Harmonix Slammi Plus Polyphonic Pitch Shifter/Harmony Pedal transposes your pitch in two different directions over a +/-3 octave range (transpose up, down, or both) simultaneously. The 11-position Shift switch selects the maximum transposition starting with D (Detune) which is a shift of 17 cents that creates a chorus or doubling effect.

The Electro-Harmonix Slammi Plus Polyphonic Pitch Shifter/Harmony Pedal transposes your pitch in two different directions over a +/-3 octave range (transpose up, down, or both) simultaneously. The 11-position Shift switch selects the maximum transposition starting with D (Detune) which is a shift of 17 cents that creates a chorus or doubling effect.

The Dual setting outputs two pitch-shifted signals. The first follows the Shift knob as if in UP mode. The second transposed signal depends on whether the Slammi Plus is set to Pitch or X-Fade. In Pitch mode, the secondary shifted signal bends at the same rate as the primary signal. When in X-Fade mode, the secondary signal is set by the Pitch Mix knob and does not bend. The interval choices are in half-step increments up to +/-1 octave. The volume of the secondary signal decreases by sweeping the pedal from heel to toe.

Features

  • Glitch-free transposing over a +/-3 octave range
  • Three Shift Modes: Up, Down, and Dual
  • Dual Pitch Shifting mode enables Slammi Plus to generate two separate pitch shift intervals simultaneously
  • X-Fade mode keeps the pitch-shift interval fixed (does not bend) while the foot pedal cross-fades between your dry note and pitch-shifted note or cross-fades from one pitch-shifted interval to another
  • Fully polyphonic
  • Added flexibility in setting the heel position's pitch-shifted interval
  • Blend control lets you fine tune the wet/dry mix
  • Runs on a 9V battery (included) or most third-party power supplies including the EHX 9.6 VDC/200mA PSU (sold separately)
  • Traditional rack and pinion style operating mechanism


Specifications

Input Impedance

2 MOhms

Output Impedance

Nominal: 750 Ohms

Input/Output

1/4" input jack
1/4" output jack

Power Source

9 V battery or 9 VDC adapter (center negative)

Current Draw

24 mA

Compliance

FCC

Package Weight

875 g

Package Dimensions (L x W x H)                               

29.21 x 12.19 x 8.38 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product