Description

The Behringer RX1602 rack-mountable mixer enables you to effortlessly achieve premium-quality sound, thanks to 16 balanced ultra-low noise, high-headroom line inputs, which can be used for 8 stereo inputs, 16 mono inputs – or any combination thereof. This high level of versatility makes the RX1602 a multipurpose line mixer that is ideal for both your live performances and studio recording projects. The incredible RX1602 is perfect for sub-mixing multiple keyboards, sound modules and samplers – and is an absolute “must-have” for monitoring your multitrack recording projects! So easy to use and loaded with intuitive features, the EURORACK PRO RX1602 should be in every recording enthusiast’s or live performer’s toolkit.

The RX1602 comes equipped with all the necessary features to create the right mix for your sound, including 16 high-headroom Inputs (8 stereo or 16 mono), which can be used for individual line-level instruments or component outputs. Thanks to RX1602’s Ultra-Low Noise (ULN) high-headroom design, you can run up to 16 inputs, even at very high signal levels, without the slightest hint of clipping distortion – which means your precious audio content will exhibit the ultimate in signal integrity and absolute transparency.

Each dual-input channel features individual Balance and Level controls, plus an illuminated, double-function Mute button with a built-in Clip LED that makes it easy to set optimal signal levels. You also get highly-accurate, dual 7-segment LED level meters and individual Left and Right Main Mix level controls. For added flexibility, the Monitor/FX signal is even assignable to the headphones. And if you need to add vocals to the mix, just connect a high-quality microphone preamplifier (such as our MIC100 or MIC2200, not included) and sing to your heart's content.

All of the RX1602 mixer's 1/4" TRS Inputs can be found on the rear panel, along with the L/R Main Outputs, which are ideal for sending the mix to your recording device or PA system. Use the Monitor Out to send the monitor bus signal to your live-performance floor monitors, or to the headphone amp in the recording studio. Alternatively, the Monitor Out is the best way to add FX to your mix – just connect it to your FX processor's input and its output back into any available input on your RX1602.

No matter what your audio mixing needs, the RX1602 will take your talent to the next level – at an ultra-affordable price that will simply amaze you! Professional sound quality, flexibility and easy-to-use top-shelf features – the EURORACK PRO RX1602 provides uncompromisingly-transparent and crystal-clear audio performance for all your live gigs and recording sessions. 

Description

Description

Description

Description

Description

You can manage your audio signals easily with the Behringer Xenyx 502 mixer. Featuring three input channels (one mono and two stereo) and a 2-band EQ, the Xenyx 502 is equally suited for studio or live use. To handle your input sources, you get one Xenyx mic preamp, two stereo channels with dual 1/4" inputs, and CD/tape inputs and outputs with RCA connections. Two 1/4" outputs are ready to send your mix to your sound system or studio monitors. If you need an efficient and easy way to mix your audio, check out the Behringer Xenyx 502.

The 5-input, 2-bus XENYX 502 with XENYX mic preamp can accommodate either a dynamic or condenser microphone. The 2-band British EQ is famous for its warm, musical sound. Play music between sets via the RCA CD/Tape Inputs (main mix or control room/phones assignable) and record your performance to an outboard recording device via the RCA outputs.

Weighing in at a mere 1.2 pounds (550 g), the XENYX 502 is the portable, practical way to turn a speech or scaled-down performance into a sound to behold. Schools, meeting rooms, restaurants and songsmiths the world over agree this mighty mite is a high-fidelity lifesaver.

No matter what your audio mixing needs, the XENYX 502 provides the performance and features that can take your talent to the next level, at a price sure to amaze you. Professional sound quality, our legendary XENYX mic preamps, British-style EQs and rugged reliability make XENYX 502 ideal for both your live gigs and recording.

Description

Description

Description

The ultra-compact Behringer Xenyx QX602MP3 2-bus mixer’s 6 Inputs (2 mic, 2 stereo) allow you to effortlessly achieve premium-quality sound, thanks to its 2 onboard studio-grade Xenyx Mic Preamps with available Phantom Power, and our ultra-musical “British” channel EQs. Add to this a high-performance MP3 player for accessing audio files from a USB stick, and a built-in 24-bit, stereo multi-FX processor with presets for studio-class reverb and delay, and the QX602MP3 becomes an incredibly versatile – and amazingly affordable mixer.

The Xenyx QX602MP3 gets its name from our legendary, high headroom Xenyx mic preamps, which have been praised by audio engineers all over the world. These state-of-the-art mic pres represent a major step in the evolution of audio technology – and they can easily hold their own, even when compared to the most expensive stand-alone mic preamps. XENYX preamps offer a staggering 130 dB of dynamic range, with a bandwidth that extends from below 10 Hz to well above 200 kHz. Armed with these outstanding mic preamps, the Xenyx QX602MP3 provides such transparent, crystal-clear performance you just might think someone upgraded your mics while you weren’t looking.

Performing live calls for high-quality digital FX, and we’ve given the QX602MP3 the perfect blend of the two most-beloved and effective – reverb and delay. Ideal for adding warmth and body to your voice and instruments, our world-class 24-bit FX engine’s Reverb/Delay preset has been custom-engineered to give your performance that truly professional finishing touch. And if you already have a favorite external effects processor, QX602MP3’s Aux Send and Stereo Return functionality is sure to put a smile on your face. The QX602MP3 is the most versatile in its class!

Channels 1 and 2 can accommodate 2 XLR dynamic or condenser microphones, or Line-level sources. The remaining 2 stereo channels (3/4 & 5/6) can either be used for 2 stereo instruments, such as keyboards or sound modules, or 4 independent mono Line inputs. During you well-deserved breaks, you can play music from your phone/tablet headphone out via channel 5?6’s handy 3.5 mm stereo jack, or use the onboard mp3 player to access songs from a USB stick. And if you need even more inputs, QX602MP3’s Stereo Aux Return can be used as 2 additional line-level inputs. For your convenience, the Main, Phones and Control Room Outputs are all located right on the top panel for quick and easy setup.

No matter what your audio mixing needs, the Xenyx QX602MP3 provides the performance and features that can take your talent to the next level, at a price sure to amaze you. Professional sound quality, our legendary Xenyx mic preamps with available Phantom Power, British-style EQ, onboard mp3 player and rugged reliability make the QX602MP3 ideal for all of your live performances.

Description

The Mackie DL16S is a 16-channel wireless digital live sound mixer with integrated Wi-Fi, well suited for musicians, engineers, clubs, bars, coffee shops, and more. The mixer features 16 Onyx+ recallable preamps available on 8 XLR inputs and 8 combo XLR-1/4" inputs, while 8 fully-assignable outputs are available on XLR connectors, plus there is a dedicated 1/4" headphone output.

The DL16S offers sophisticated signal processing with a 4-band PEQ, HPF, gate, compression, and an RTA/spectrograph for each of the 16 input channels. Each of the 13 output busses offer a 4-band PEQ, HPF/LPF, a 31-band GEQ, compressor/limiter, alignment delay, and RTA/spectrograph. Additionally, there are six VCAs, six mute groups, and four stereo FX processors with professional-quality reverb, delay, chorus, flange, and more.

The steel construction and large rubber corners ensure the DL16S can handle the rigors of on-the-road wear and tear. The integrated handle provides an easy carry option for quick deployment, while the built-in Wi-Fi antenna allows you to connect to the DL16's network for seamless wireless control. For greater range, an Ethernet connector allows you to connect directly to a wireless router or network switch.

The Mackie DL16S utilizes the Master Fader control app, which operates on an iOS or Android device, as well as Mac and Windows computers (with the soon-to-be released Master Fader 5.1). Navigate quickly with the overview and view groups, and quickly set up channels with factory and user presets, plus recall Onyx+ mic preamp settings. Up to 20 devices can be connected, allowing musicians to create their own headphone mix, while the Access Limiting setting prevent unwanted adjustments for the FOH engineer.

The integrated 16x16 USB 2.0 audio interface allows you to record the show for a later mixdown or perform a virtual sound check, plus you can play intermission music, backing tracks, and more directly into a dedicated stereo return channel. With a low cost and a high channel and feature count, the Mackie DL16S makes for a budget-friendly yet professional studio recording environment.

The DL16S features a download for ProTools | First and Waveform software and The Musician's Collection plug-in package including 23 high-quality plugins with BBD Delay, Level Lite, 304E EQ, and 304C Compressor. To authorize the software, simply input the mixer's serial number on the website.

Description

Lorem ipsum dolor sit amet, consectetur adipisicing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam,