CATEGORY


Sennheiser XSW 1-835 DUAL - Dual Vocal Set

Brand: Sennheiser

Model Number: XSW 1-835 DUAL

Product Code: QD1534

Availability: In stock

AED 2,434.90 AED 2,563.05

The Sennheiser XSW 1-835 Dual-Vocal Set with Two 835 Handheld Microphones includes an EM-XSW 1 dual stationary receiver with internal antennas, two SKM XSW transmitters with mute switches, two MZQ 1 microphone clips, an NT 12-5 CW power supply, and four AA batteries.

The Sennheiser XSW 1-835 Dual-Vocal Set with Two 835 Handheld Microphones includes an EM-XSW 1 dual stationary receiver with internal antennas, two SKM XSW transmitters with mute switches, two MZQ 1 microphone clips, an NT 12-5 CW power supply, and four AA batteries.

The analog UHF dual-channel wireless system can be used in several applications for singers, presenters, DJs, churches, and schools. Designed with ease of use in mind, the XSW 1 Dual-Vocal Set features automatic frequency management and synchronization via remote channel for easy setup. In addition, it is equipped with up to 10 compatible channels.

The EM-XSW 1 Dual-Channel Stationary Receiver with Internal Antennas is a 2-channel analog UHF wireless receiver. It can be used for singers and presenters when paired with an XS wireless 1 series handheld transmitter and microphone capsule (sold separately). The dual-channel receiver is designed with ease of use in mind and is well suited for DJ, church, and school applications.

Each receiver channel is built with antenna-switching diversity reception and features automatic frequency management and synchronization via remote channel. Up to 10 compatible channels are available. 

Features

  • EM-XSW 1 Dual-Channel Receiver
  • 2 x SKM 835-XSW Handheld Transmitters
  • 2 x MZQ 1 Microphone Clips
  • Antenna-switching 2-channel diversity reception
  • Integrated antennas
  • Automatic frequency management and synchronization via remote channel for easy setup
  • Selectable UHF frequencies within a large bandwidth
  • Up to 10 compatible channels

Specifications

System

Modulation

Wideband FM

Switching Bandwidth

Up to 24 MHz

Frequencies

80 factory presets (8 banks of 10 channels each)

Signal to Noise Rate

>/- 103 dBA

THD

 0.9%

Temperature Range

Operation: 32 to 104°F / 0 to 40°C
Storage: -4 to 158°F / -20 to 70°C

Transmitter Synchronization                          

2.4 GHz, low power OQPSK (only active during synchronization

 

Receiver

Receiver Type

Double Superheterodyne

Frequency Band

(A: 548 to 572 MHz)

Diversity Method

Antenna switching diversity via internal antennas

Sensitivity

< 3 µV at 52 dB(A) rms S/N (at peak deviation)

AF Frequency Response

50 Hz to 16 kHz (-3 dB)

Maximum AF Output Voltage                         

1/4" / 6.3 mm Socket (Unbalanced): +6 dBu
XLR Socket (Balanced): +12 dBu

Audio Adjustment Range

45 dB, adjustable in 5 dB steps

Power Supply

12 VDC nominal / 300 mA

Squelch

Adjustable from 3 dB µV to 28 dB µV (combined with pilot tone)

Line/Mic Level

20 dB, switchable

Housing Material

Rugged ABS housing

Dimensions (W x H x D)

 32.0 x 12.7 x 4.2 cm

Weight

620 g

 

Transmitter

Modulation

Wideband FM

Frequency Range

A: 548 to 572 MHz

Switching Bandwidth

Up to 24 MHz

Signal to Noise Ratio

>/- 103 dBA

Total Harmonic Distortion

Temperature Range

Operation: 32 to 104°F (0 to +40°C)

Storage

-4 to 158°F (-20 to 70°C)

Transmitter Synchronization                          

2.4 GHz, Low Power OQPSK (only active during synchronization)

 

Microphone

Output Power

10 mW

Frequency Response

80 Hz to 16 kHz

Power Supply

2 x AA batteries, 1.5 V

Operating Time

Approximately 10 hrs.

Microphone Type

Dynamic

Polar Pattern

Dynamic cardioid

Input Sensitivity

Capsule: 1.5 mV/Pa

Adjustment Range

Transmitter Sensitivity: 0 to -30 dB, adjustable in 10 dB steps

Material of Construction                                 

Rugged ABS housing

Dimensions (L x Dia.)

26.0 x 5.0 cm

Weight

245 g

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product