CATEGORY


Rode NTG4+ Premium Shotgun Microphone

Brand: Rode

Model Number: NTG4+

Product Code: QD1722

Availability: In stock

AED 1,146.13 AED 1,206.45

Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4+ battery- or phantom-powered shotgun microphone. Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production.

Customize your tone and capture quality sound indoors or outside for your next indie film, TV shoot, or documentary project with the Rode NTG4+ battery- or phantom-powered shotgun microphone. Specialized features such as low-noise circuitry, digitally switchable pad and frequency settings, and minimal handling noise reduce the need to repair and restore audio in post production.

The elevated sensitivity of the NTG4+ allows it to produce strong output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG4+ delivers warm sound due in part to its gentle dip in high frequencies and its rumble-reducing selectable low-cut filter. A switchable treble boost is on hand for situations where additional clarity is needed.

Features

  • For Indie Films, TV & Documentaries
  • Convenient Digital Switching
  • Internal Battery or Phantom Powered
  • Switchable Treble Boost and -10 dB Pad
  • Low-Noise Circuitry
  • High Sensitivity and High Max SPL
  • Warm and Natural Tone
  • The combination of the 10.9" long body and supercardioid polar pattern yields focused front-facing directionality and enhanced attenuation of sound entering from the sides. Its low self-noise of 16 dBA and sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones. Plus, its balanced output allows longer cable runs than most camera-mount shotgun microphones.
  • Operate the NTG4+ on 48V phantom power or via its internal rechargeable lithium battery, which provides up to 150 hours of run time. The micro-USB port and supplied USB cable enable easy recharging in just two hours charge the NTG4+ via a computer, power brick, or vehicle. Thanks to its 3-pin XLR output, the NTG4+ is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras.
  • Digital switching not only allows for intuitive access to the mic's settings, but it also retains their states when the mic is switched off. Activate the 75 Hz low-cut filter to reduce low-frequency noise from common sources such as air conditioners and traffic. Use the +6 dB treble boost for enhanced clarity and intelligibility (best for environments with minimal high-frequency ambient noise). When loud sound sources threaten to distort your recording, switch on the -10 dB pad to attenuate the input level.
  • The lightweight, metal-bodied NTG4+ includes a mic clip for easy placement on a mic stand or boompole. Alternatively, mount the NTG4+ in the Rode SM4-R shockmount or Rode PG2-R pistol grip (both available separately) to impede the transfer of vibrations in boompole or handheld applications.
  • The NTG4+ has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners. For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider the Rode Blimp furry windshield and shockmount suspension system (available separately).


Specifications

Form Factor

Stand/Boom Mount

Sound Field

Mono

Operating Principle

Line Gradient

Capsule

Condenser

Diaphragm

0.5" / 12.70 mm

Polar Pattern

Supercardioid

Orientation

End Address

Circuitry

Solid-State

Pad

-10 dB

High-Pass Filter

75 Hz

Tone Adjustment

High Boost:
+6 dB

Indicators

Single LED (Status, Power)

On-Board Controls

High-Pass Filter, HF, Pad, On/Off

Windscreen

Foam (Included)

Frequency Range

20 Hz to 20 kHz

Maximum SPL

135 dB SPL

Off-Axis Rejection

5 dB at 60°
24 dB at 120°
18 dB at 180°

Impedance

200 Ohms

Sensitivity

-32 dBV/Pa at 1 kHz

Dynamic Range

119 dB

Signal-to-Noise Ratio

78 dB

Equivalent Noise Level

16 dB A-Weighted

Output Connectors (Analog)

1 x XLR 3-Pin

Operating Voltage

48 V

Operating Current Consumption

4.8 mA (Phantom Power)

Battery Type

1 x Built-In

Battery Chemistry

Lithium-Ion

Approximate Battery Life

150 Hours

Color

Black

Mounting

3/8"-16 Female, 5/8"-27 Female, Mic Clip (with Included Hardware)

Construction Material

Metal

Dimensions

Dia. 2.2 x L 27.8 cm

Weight

176 g (Microphone)

Package Weight

617 g

Package Dimensions (LxWxH)

33.02 x 13.08 x 6.60 cm

0 (Overall)

Based on 0 Comments
(0)
(0)
(0)
(0)
(0)
(0)

Related Product